BayLan     BM-02 

Bandwidth Meter

Features:

• LAN/WAN Speed Meter is used for:
• Broadband and narrow band Internet service bandwidth measurement
• LAN connection speed measurement
• Broadband router performance measurement.
• LAN Broadcast packet counts
• LAN Collision packet counts
• LAN Error packet counts
• Useful for LAN traffic diagnostic, analysis.

BayLan     BTM2L 

Remote Cable Tester for RJ45/11, BNC,USB

Features:

• Open/Short wiring test.
• Connected wires display.
• No wire or termination indication
• Crossover wire display
• Wrong connection / Non-parallel connection
• Testing of RJ11/RJ12 Telephone Cable
• Testing of RJ45 STP / UTP Lan Cable
• Testing of USB Cable
• Testing Coaxial Cable
• Do not connect to alive circuit

FEATURES:

• PN-S16 Tester Prob RJ45/11 Cable Scanner w/Remote & Earphone
• Ends cable location confusion, decisively rejects noise and false signals
• Locates cable quickly from a distance, even on an active network
• Isolates cable and wiring precisely from a bundle, despite cable bleed
• Validates correct end-to-end cable wiring and identifies telecom/datacom services
• Scan cable-Proofreading cable automatic cut over function

BayLan     BTM2 

Remote Cable Tester for RJ45/11,BNC,USB,1394

Features:

• Open / Short wiring test
• Connected wire display
• Crossover wire display
• Testing of RJ11 / RJ12 Telephone Cable
• Testing of RJ45 STP / UTP Lan Cable
• Testing of USB Cable
• Testing Coaxial Cable
• Testing IEEE 1394 cable
• 600ft test distance (RJ-45/RJ-11/BNC)

BayLan     TL-828-A 

LCD Remote Port & Length Tester for RJ45/11/BNC

Features:

• One person enough to complete cable continuity check
• Check wiring error in RJ45 Lan Cable
• Can be used to test the open circuit, short circuit across but joint, separate but joint and reverse but joint for 5E/6E UTP/STP twisted-pair, coaxial-cable and telephone wire.
• Position the error of connecting wires.
• Test the connectivity of cable separately.
• The Meter in calibration mode can be replaced by Foot.
• Measure the length of cable and determine the point of open circuit.
• Can conduct pairing measuring and length measuring separately.
• The calibrated data can be saved.
• Do not connect to alive circuit
 

BayLan     SC6106-A 

Tester RJ45/11/BNC with Voice Report

Features:

• Cable types to be tested:It is capable to test unshielded pair and shielded pair (UTP, STP) of RJ45 port; with special adapters, it is capable to test RJ11 port, telephone line (TEL) and coaxial cable (BNC).
• It is capable to detect wiring troubles such as open circuit, short-circuit and dislocation.
• It is simple and easy use and the test result is clear at a glance with the aid of LCD display of wiring diagram.
• Voice report of test result makes test work convenient and interesting.
• Single chip microprocessor software watchdog design is reliable in operation.
• Low battery voltage alarm display.
• Do not connect to alive circuit
 

FEATURES:

• GTM2L Remote Cable Tester for RJ45/11, BNC, USB
• Open/Short Lan cable tester (STP/UTP,Local Talk, Phone Net, Thin Coaxial)
• Separable passive module designed for testing the installed cables
• Termination value test for BNC connectors
• Single operaiton button, easy opearation step
• Connector : RJ-45/BNC/RJ-11/USB each on main unit
                     RJ-45/BNC/RJ-11/USB each on separable remote module
• Connected wires test.
• No wire or termination indication.
• Wrong connection/Non-parallel connection.
• Ethernet 10Base-2 / 10Base-5 termination value detection.
• Do not connect to alive circuit

FEATURES:

• NetChe link tester is a versatile hand-held cable tester
• Its is fast, reliable and easy to verify the cable continuity.
• Open short reversal and msi wire from 1 to 8 conductors
• It can easily read the correct pin configuration of LAN/TEL cable
• For UTP/STP 4& 2 pairs LAN cable (10/100Base-T)
• For telephone line cable (4, 6,8 conductors)
• Do not connect to alive circuit

BayLan     BTZ4 

Tester Probe (RJ45/11 Cable Scanner) w/Remote

Features:

• Tester has three basic functions: Finding (Tracing) communication cables, Testing and verifying status of the circuit.
• Ideal tool for technician to fix communication cable.
• Testing The Communication Circuit
• Testing Telephone Patch Cord
• Testing Lan Patch Cord
• This “smart mouse” will help you to check and find the twin cables
• This can work only without Installation of equipment

FEATURES:

• This link tester is a versatile hand-held cable tester (Low Cost)
• Its is fast, reliable and easy to verify the cable continuity.
• Open short reversal and msi wire from 1 to 8 conductors
• It can easily read the correct pin configuration of LAN/TEL cable and COAX
• For UTP/STP 4& 2 pairs LAN cable (10/100Base-T)
• For telephone line cable (4, 6,8 conductors)
• Coax cable (BNC to BNC) 10 Base-2
• Do not connect to alive circuit

FEATURES:

• Battery 9V
• Used in all type Cable Tester